Metallurgy Single Girder Overhead Crane

Introduction of LDY Single-girder Metallurgical Overhead Crane:

LDY electric single-girder metallurgical overhead crane is collocated with YH type metallurgical electric hoist, mainly used for hoisting molten metal in metallurgy, casting place. Its lifting capacity is less than 10t.

LDY electric single-girder metallurgical overhead crane is widely used in metallurgy, hydropower, aerospace, shipbuilding, automotive, coal, petrochemical and other industries.

Technical Parameter:

LDY Metallurgy Electric Single Girder Crane
Crane Traveling Mechanism		Traveling Speed		m/min	20		30
		Reduction Ratio			58.95		39.42
		Motor	Type		Cone-shape Cage
			Power	KW	0.8×2， 1.5×2
			RPM	r/min	1380
Lifting Mechanism (Electric Hoist)		Hoist Type			YHII
		Lifting Speed		m/min	8, 7
		Lifting Height		m	9， 12， 15， 18， 20
		Traveling Speed		m/min	20
		Motor			Cone-shape Cage
Work Duty					A6
Power Supply					380V, 50Hz, Three Phase
Diameter of Wheel				mm	Φ270，Φ 400
Wideth of Track				mm	37~70

Features of LDY Electric Single-girder Metallurgical Overhead Crane:

1. The bottom of the crane girder adopts special insulation treatment.
2. Working environment is -10 ℃ – +60 ℃. At the temperature of 40 ° C, the relative humidity could not exceed 50%.
3. The design and manufacture of the crane meet the requirements of the AQSIQ (2007) No. 375 document issued by the General Administration of Quality Supervision, Inspection and Quarantine.
4. Other occasions for transporting molten non-metallic materials and lifting hot solid metal may also be used for reference.